Log in
(0) item
0
  • No products in the cart.

Laser Cutting

Ticket Type Price Cart

Laser Cutting 2: Machine Training and Design: Laser certification

(week 2 of 2)

Class Overview

In this class we will continue learning functions in our 2D graphic design software and each student will spend hands on time with the laser cutter. We will continue exploring new functions in our 2D graphics design software. We will review loading files, setting up the machine, and using the Thunder Laser software.

Laser cutting and graphics design is divided into 2 classes. Since laser cutting is one of our most popular classes we suggest you RSVP before either session. After attending both classes you will be well versed in using the laser cutters on your own (but we are still here to help if needed)!

Class Cost

  • $45 for non-members

  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

Laser Cutting and Graphics Design 1

Age Requirement

18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.

After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 1:00 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!

Hope to see you all soon!

Inspiration and Project Ideas to Get you Started!

Laser Cut Candle Holders

Laser Cut Wooden Earrings

Viking Chest with Lock and Hinge

Catapult

Ticket Type Price Cart

Advanced Laser Cutting: Engraving 3D Features

 

Class Overview

This class will push the limits of what laser etching machines can do from the software side. Although laser machines are traditionally optimized for 2D pieces, with some software tricks and a bit of patience it’s very possible to create a 3D relief cut piece! This is a way to add a more complexity to add a beautiful touch to any laser made piece.

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None, but taking Laser Cutting authorization before is suggested.

Materials Used

Materials demonstrated

  • Maple (hardwood)

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

It's suggested to attend the Laser Cutting authorization classes for hands on practice using the machines! If you've already taken the class and are authorized to use the machine, your encouraged to try to make your own cool things.

 We suggest you visit HexLab during open hours to practice and our staff can help answer any questions.
Ticket Type Price Cart

Laser Cutting 2: Machine Training and Design: Laser certification

(week 2 of 2)

Class Overview

In this class we will continue learning functions in our 2D graphic design software and each student will spend hands on time with the laser cutter. We will continue exploring new functions in our 2D graphics design software. We will review loading files, setting up the machine, and using the Thunder Laser software.

Laser cutting and graphics design is divided into 2 classes. Since laser cutting is one of our most popular classes we suggest you RSVP before either session. After attending both classes you will be well versed in using the laser cutters on your own (but we are still here to help if needed)!

Class Cost

  • $45 for non-members

  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

Laser Cutting and Graphics Design 1

Age Requirement

18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.

After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 1:00 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!

Hope to see you all soon!

Inspiration and Project Ideas to Get you Started!

Laser Cut Candle Holders

Laser Cut Wooden Earrings

Viking Chest with Lock and Hinge

Catapult

Ticket Type Price Cart

Laser Cutting 1: Hands on Machine Training and Design (week 1 of 2)

Class Overview

In this class, art and technology merge as we show you how to create your own unique piece of art. You will learn how to easily create beautiful 2D drawings using graphics design software and then cut out those designs using laser cutters.

We will learn functions that are common to all graphics design software that will allow you to draw almost anything, instantly. We will use free software (Draftsight) available on-line which you can download to your home computer or your laptop and practice the skills you learn. You will also learn how to load the files you create into our laser cutters, set up the machines and create products of your own design. With the thousands of materials to work with like wood, leather and acrylic and the simplicity of modern technology anyone can find their inner Picasso. Laser cutting and graphics design is divided into 2 classes. You must complete both to become certified to use our machines. Since laser cutting is one of our most popular classes we suggest you RSVP before either session. After attending both classes you will be well versed in using the laser cutters on your own (but we are still here to help if needed)!

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None.

Materials Used

SMD Soldering kit (for you to take home)

  • Soldering Iron
  • vOsciloscope
  • Power Supply
  • Heat Gun
  • Heat Plate

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.

After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 12:30 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can't make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!
Ticket Type Price Cart

Advanced Laser Cutting: Engraving 3D Features

 

Class Overview

This class will push the limits of what laser etching machines can do from the software side. Although laser machines are traditionally optimized for 2D pieces, with some software tricks and a bit of patience it’s very possible to create a 3D relief cut piece! This is a way to add a more complexity to add a beautiful touch to any laser made piece.

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None, but taking Laser Cutting authorization before is suggested.

Materials Used

Materials demonstrated

  • Maple (hardwood)

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

It's suggested to attend the Laser Cutting authorization classes for hands on practice using the machines! If you've already taken the class and are authorized to use the machine, your encouraged to try to make your own cool things.

 We suggest you visit HexLab during open hours to practice and our staff can help answer any questions.
Ticket Type Price Cart

Laser Cutting 2: Machine Training and Design: Laser certification

(week 2 of 2)

Class Overview

In this class we will continue learning functions in our 2D graphic design software and each student will spend hands on time with the laser cutter. We will continue exploring new functions in our 2D graphics design software. We will review loading files, setting up the machine, and using the Thunder Laser software.

Laser cutting and graphics design is divided into 2 classes. Since laser cutting is one of our most popular classes we suggest you RSVP before either session mgpharmacie.com/. After attending both classes you will be well versed in using the laser cutters on your own (but we are still here to help if needed)!

Class Cost

  • $45 for non-members

  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

Laser Cutting and Graphics Design 1

Age Requirement

18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.

After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 1:00 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!

Hope to see you all soon!

Inspiration and Project Ideas to Get you Started!

Laser Cut Candle Holders

Laser Cut Wooden Earrings

Viking Chest with Lock and Hinge

Catapult

Ticket Type Price Cart

Laser Cutting 1: Hands on Machine Training and Design (week 1 of 2)

Class Overview

In this class, art and technology merge as we show you how to create your own unique piece of art. You will learn how to easily create beautiful 2D drawings using graphics design software and then cut out those designs using laser cutters.

We will learn functions that are common to all graphics design software that will allow you to draw almost anything, instantly. We will use free software (Draftsight) available on-line which you can download to your home computer or your laptop and practice the skills you learn. You will also learn how to load the files you create into our laser cutters, set up the machines and create products of your own design. With the thousands of materials to work with like wood, leather and acrylic and the simplicity of modern technology anyone can find their inner Picasso. Laser cutting and graphics design is divided into 2 classes. You must complete both to become certified to use our machines. Since laser cutting is one of our most popular classes we suggest you RSVP before either session. After attending both classes you will be well versed in using the laser cutters on your own (but we are still here to help if needed)!

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None.

Materials Used

SMD Soldering kit (for you to take home)

  • Soldering Iron
  • vOsciloscope
  • Power Supply
  • Heat Gun
  • Heat Plate

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.

After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 12:30 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can't make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!
Ticket Type Price Cart

Laser Engraving: Adding 3D Features

 

Class Overview

This class will push the limits of what laser etching machines can do from the software side. Although laser machines are traditionally optimized for 2D pieces, with some software tricks and a bit of patience it’s very possible to create a 3D relief cut piece! This is a way to add a more complexity to add a beautiful touch to any laser made piece.

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None, but taking Laser Cutting authorization before is suggested.

Materials Used

Materials demonstrated

  • Maple (hardwood)

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

It's suggested to attend the Laser Cutting authorization classes for hands on practice using the machines! If you've already taken the class and are authorized to use the machine, your encouraged to try to make your own cool things.

 We suggest you visit HexLab during open hours to practice and our staff can help answer any questions.
Ticket Type Price Cart

Laser Cutting: Alternative Materials

   

   

Class Overview

This class will push the limits of what laser etching machines can do with different work piece materials. The most common materials used for the laser machines are Wood and Acrylic, but there are an amazing amount of materials that can easily be used on the lasers! There are obviously different types of wood, but there are even more exciting materials like stamp rubber, 2 color plastics, paper, glass, pumpkins, and much more!

Many novel and exotic materials will be demonstrated on how to cut/etch, as well as the ideal uses of each of the materials.

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None, but taking Laser Cutting authorization is suggested.

Materials Used

Materials

  • 2 color Plastics
  • Rubber Stamps
  • Cardboard/Foam Core
  • Metal (marking)
  • Cloth
  • Even More!

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

It's suggested to attend the Laser Cutting authorization classes for hands on practice using the machines! If you've already taken the class and are authorized to use the machine, your encouraged to try to make your own cool things.

 We suggest you visit HexLab during open hours to practice and our staff can help answer any questions.
Ticket Type Price Cart

Advanced Laser Cutting: Engraving 3D Features

 

Class Overview

This class will push the limits of what laser etching machines can do from the software side. Although laser machines are traditionally optimized for 2D pieces, with some software tricks and a bit of patience it’s very possible to create a 3D relief cut piece! This is a way to add a more complexity to add a beautiful touch to any laser made piece.

Class Cost

  • $35 for non-members
  • $25 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership

Prequisites

  • None, but taking Laser Cutting authorization before is suggested.

Materials Used

Materials demonstrated

  • Maple (hardwood)

Age Requirement

  • 18 and up (exceptions can be made for ages 15-17 that are interested, and 12+ are ok if they attend with a parent)

Whats Next After I Take This Class:

It's suggested to attend the Laser Cutting authorization classes for hands on practice using the machines! If you've already taken the class and are authorized to use the machine, your encouraged to try to make your own cool things.

 We suggest you visit HexLab during open hours to practice and our staff can help answer any questions.