April 28, 2018 11:30 am - 1:15 pm HexLab Makerspace, Chattsworth, CA
| Ticket Type | Price | Cart |
|---|
Class Overview
This class series is intended to teach you how to program and operate a CNC Machine in one day, through two separated classes: CNC 1: Intro to CNC Programming and the next class in this series CNC 2: Router Training.
In this first class CNC1: Intro to CNC Programming – you will learn how to create a 3D model and also generate tool-paths from a 3D model using FUSION 360!
Class Cost
-
$40 for non-members
-
$30 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership
Prequisites
None
Age Requirement
16 and Up
Whats Next After I Take This Class:
Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.
After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 12:30 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!
Hope to see you all soon!
April 28, 2018 1:30 pm - 4:15 pm HexLab Makerspace, Chattsworth, CA
| Ticket Type | Price | Cart |
|---|
CNC 2: CNC Router Training
Class Overview
This CNC Class Series is intended to teach you how to program and operate a CNC Router Machine in one day, through two separate classes including CNC 1: Intro to CNC Programming and CNC 2: CNC Router Training.
In this second class – CNC 2: Router Training – you will learn to Operate a CNC Router and make your very first CNC object. This class also includes 1 extra hour of practice. After taking this class you will be allowed to use our CNC Router Machine and take home your very first machined piece by the end of class!
Class Cost
-
$60 for non-members
-
$50 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership
Prequisites
CNC 1: Intro to CNC Programming must be taken prior to this class.
Age Requirement
All ages 18+ are welcome (ages 15 – 17 must be accompanied by an adult).
Whats Next After I Take This Class:
Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.
After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 12:30 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!
Once you are approved on our CNC Router Table you can attend advanced classes to learn the CNC Mill and CNC Lathe.
Hope to see you all soon!
April 14, 2018 1:30 pm - 4:15 pm HexLab Makerspace, Chattsworth, CA
| Ticket Type | Price | Cart |
|---|
CNC 2: CNC Router Training
Class Overview
This CNC Class Series is intended to teach you how to program and operate a CNC Router Machine in one day, through two separate classes including CNC 1: Intro to CNC Programming and CNC 2: CNC Router Training.
In this second class – CNC 2: Router Training – you will learn to Operate a CNC Router and make your very first CNC object. This class also includes 1 extra hour of practice. After taking this class you will be allowed to use our CNC Router Machine and take home your very first machined piece by the end of class!
Class Cost
-
$60 for non-members
-
$50 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership
Prequisites
CNC 1: Intro to CNC Programming must be taken prior to this class.
Age Requirement
All ages 18+ are welcome (ages 15 – 17 must be accompanied by an adult).
Whats Next After I Take This Class:
Take a look at the Project Ideas shown below and create one of them during a free assisted practice session or during open hours. This helps you practice the steps learned during class and feel more comfortable using the machine.
After you take this intro class we encourage you to come in for a free assisted practice session. Make sure to set a reminder for one of our assisted practice sessions: Sundays from 12:30 pm to 5 pm or Wednesdays from 6 pm to 9 pm. If you can’t make one of these weekly practice sessions we suggest you visit HexLab during open hours to practice and our staff can help answer any questions!
Once you are approved on our CNC Router Table you can attend advanced classes to learn the CNC Mill and CNC Lathe.
Hope to see you all soon!
April 14, 2018 11:30 am - 1:15 pm HexLab Makerspace, Chattsworth, CA
| Ticket Type | Price | Cart |
|---|
CNC 1: Intro to CNC Programming
Class Overview
This class series is intended to teach you how to program and operate a CNC Machine in one day, through two separated classes: CNC 1: Intro to CNC Programming and the next class in this series CNC 2: Router Training.
In this first class CNC1: Intro to CNC Programming – you will learn how to create a 3D model and also generate tool-paths from a 3D model using FUSION 360!
Class Cost
-
$40 for non-members
-
$30 for monthly members (you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership
Prequisites
None
Age Requirement
16 and Up
