Log in
(0) item
0
  • No products in the cart.

Electronics

Description:

This class will teach the introduction to Arduino programming. Recommended for absolute beginners up to beginners with some knowledge of Arduino This class covers only the programming aspect of Arduino. Check out the other Sufficient Space courses for Electronics, Electricity, and Soldering. Included in the cost of the class you will walk away with a pre-built Arduino Nano with LEDs, a pushbutton, a slider potentiometer, and a programming cable to continue learning on your own at home when you've finished the class. At the end of the class you will have a functioning on-the-fly programmable kitchen timer using only 1 pushbutton, 1 potentiometer and 3 LEDs (plus the built in Arduino LED) I put a heavy emphasis on showing every step of how I do things and providing ample documentation for everything. As such my class will include a link to my Github which will have all of the code for you to follow along and use as a resource after the class is over.

Required materials for this course:

-Laptop with functioning USB port and wifi capability

Age restrictions:

-Intended for 18+ but exceptions can be made for interested persons age 15-17

Pricing:

-$60 for the general public -$15 discount for Sufficient Space members (contact the organizer for details) Visit the eventbrite link below to purchase a ticket: https://www.eventbrite.com/e/beginner-arduino-programming-class-at-sufficient-space-makerspace-tickets-64910721716 Refunds: -Refunds are available with >24 hours notice before the class begins DISCLAIMER: MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.

Description

Soldering is an incredibly useful and versatile skill for making and repairing electronics and is your first step towards entering the vast world of electronic design. This class aims to teach students the skills that they will need in order to solder effectively while prioritizing the health and safety of the student, the device being soldered, and the soldering iron itself. The class will start with a lecture on what solder is, different kinds of solder and soldering irons, the other tools that you will need to build electronics effectively, and best practices for reducing exposure to chemicals. Students will then build a simple kit to put their new skills to the test. The class price includes the cost of the kit. This class is required for certification to use the electronics station.

AGE RESTRICTIONS:

Students older than 16 welcome.

PRICING:

$50 General Admissions To purchase tickets click the link below: https://www.eventbrite.com/e/introduction-to-electronic-soldering-and-safety-tickets-64646474345 MEMBERS: be sure to use your monthly discount code to redeem your 30% discount!

DISCLAIMER:

To ensure that spaces aren't taken up by people who wont be able to make their classes, there are NO REFUNDS offered for any of our official classes (this may or may not include classes organized by 3rd parties which are hosted in our space). If you are not able to make it to a class please contact us and we will credit you for a space in another class. MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.
COURSE DESCRIPTION Harnessing Electricity is a SUPER POWER! A SUPER POWER you can begin to learn in this 2.5 hour Makerspace class taught by Andre, an instructor with a passion for democratizing engineering and making the complex simple to understand. Now more than ever, there is no reason not to get started learning how to work with electronic equipment and teaching yourself how to design and build electronics. This course is designed for complete beginners and is designed to take you to confidence working around all types of electricity (and to recognize electrical danger so you don't work on things you shouldn't!) In this class, you will come away with your own circuit on a breadboard that you have built using the most common electircal components (Wire, switches, resistors, transistors, capacitors, Diodes and an Integrated Circuit). Along the way you'll master these concepts: -What is Electrical Power and How to measure it? -How to deeply and intuively understand concepts like Volts, Amps, Resistance, Ohm's Law -How does wall outlet electricity differ from that in a battery? -How do you work with and on electrical devices safely and without damaging components or yourself? -How do you interpret a circuit diagram? -How to safely and correctly Use the basic Electronics Workbench Tools at the Makerspace -How to use a Breadboard to Build a Working Prototype of a Circuit This course is a pre-requisite to higher level electronics courses at the Makerspace and is intended for beginners of al ages. If you already have electronics skills you can test out of this directly into higher level courses. This is for total beginners. *NOTE: This is not a course on how to solder. Soldering is a seperate course and all the circuits we will build in this class involve no soldering. AGE RESTRICTIONS: Intended for 18 and up (exceptions can be made for ages 15-17 that are interested, and 12-14 are ok if they attend with a parent). Contact organizer for approval for students younger than 12. PRICING: $75 General Admissions To purchase a ticket please check the relevant eventbrite link here: https://www.eventbrite.com/e/electricity-electronics-for-complete-beginners-tickets-63719485697 MEMBERS: be sure to use your monthly discount code to redeem your 30% discount! DISCLAIMER: To ensure that spaces aren't taken up by people who wont be able to make their classes, there are NO REFUNDS offered for any of our official classes (this may or may not include classes organized by 3rd parties which are hosted in our space). If you are not able to make it to a class please contact us and we will credit you for a space in another class. MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.
COURSE DESCRIPTION Harnessing Electricity is a SUPER POWER! A SUPER POWER you can begin to learn in this 2.5 hour Makerspace class taught by Andre, an instructor with a passion for democratizing engineering and making the complex simple to understand. Now more than ever, there is no reason not to get started learning how to work with electronic equipment and teaching yourself how to design and build electronics. This course is designed for complete beginners and is designed to take you to confidence working around all types of electricity (and to recognize electrical danger so you don't work on things you shouldn't!) In this class, you will come away with your own circuit on a breadboard that you have built using the most common electircal components (Wire, switches, resistors, transistors, capacitors, Diodes and an Integrated Circuit). Along the way you'll master these concepts: -What is Electrical Power and How to measure it? -How to deeply and intuively understand concepts like Volts, Amps, Resistance, Ohm's Law -How does wall outlet electricity differ from that in a battery? -How do you work with and on electrical devices safely and without damaging components or yourself? -How do you interpret a circuit diagram? -How to safely and correctly Use the basic Electronics Workbench Tools at the Makerspace -How to use a Breadboard to Build a Working Prototype of a Circuit This course is a pre-requisite to higher level electronics courses at the Makerspace and is intended for beginners of al ages. If you already have electronics skills you can test out of this directly into higher level courses. This is for total beginners. *NOTE: This is not a course on how to solder. Soldering is a seperate course and all the circuits we will build in this class involve no soldering. AGE RESTRICTIONS: Intended for 18 and up (exceptions can be made for ages 15-17 that are interested, and 12-14 are ok if they attend with a parent). Contact organizer for approval for students younger than 12. PRICING: $75 General Admissions To purchase a ticket please check the relevant eventbrite link here: https://www.eventbrite.com/e/electricity-electronics-for-complete-beginners-tickets-63719485697 MEMBERS: be sure to use your monthly discount code to redeem your 30% discount! DISCLAIMER: To ensure that spaces aren't taken up by people who wont be able to make their classes, there are NO REFUNDS offered for any of our official classes (this may or may not include classes organized by 3rd parties which are hosted in our space). If you are not able to make it to a class please contact us and we will credit you for a space in another class. MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.
COURSE DESCRIPTION Harnessing Electricity is a SUPER POWER! A SUPER POWER you can begin to learn in this 2.5 hour Makerspace class taught by Andre, an instructor with a passion for democratizing engineering and making the complex simple to understand. Now more than ever, there is no reason not to get started learning how to work with electronic equipment and teaching yourself how to design and build electronics. This course is designed for complete beginners and is designed to take you to confidence working around all types of electricity (and to recognize electrical danger so you don't work on things you shouldn't!) In this class, you will come away with your own circuit on a breadboard that you have built using the most common electircal components (Wire, switches, resistors, transistors, capacitors, Diodes and an Integrated Circuit). Along the way you'll master these concepts: -What is Electrical Power and How to measure it? -How to deeply and intuively understand concepts like Volts, Amps, Resistance, Ohm's Law -How does wall outlet electricity differ from that in a battery? -How do you work with and on electrical devices safely and without damaging components or yourself? -How do you interpret a circuit diagram? -How to safely and correctly Use the basic Electronics Workbench Tools at the Makerspace -How to use a Breadboard to Build a Working Prototype of a Circuit This course is a pre-requisite to higher level electronics courses at the Makerspace and is intended for beginners of al ages. If you already have electronics skills you can test out of this directly into higher level courses. This is for total beginners. *NOTE: This is not a course on how to solder. Soldering is a seperate course and all the circuits we will build in this class involve no soldering. AGE RESTRICTIONS: Intended for 18 and up (exceptions can be made for ages 15-17 that are interested, and 12-14 are ok if they attend with a parent). Contact organizer for approval for students younger than 12. PRICING: $75 General Admissions To purchase a ticket please check the relevant eventbrite link here: https://www.eventbrite.com/e/electricity-electronics-for-complete-beginners-tickets-63719485697 MEMBERS: be sure to use your monthly discount code to redeem your 30% discount! DISCLAIMER: To ensure that spaces aren't taken up by people who wont be able to make their classes, there are NO REFUNDS offered for any of our official classes (this may or may not include classes organized by 3rd parties which are hosted in our space). If you are not able to make it to a class please contact us and we will credit you for a space in another class. MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.
COURSE DESCRIPTION Harnessing Electricity is a SUPER POWER! A SUPER POWER you can begin to learn in this 2.5 hour Makerspace class taught by Andre, an instructor with a passion for democratizing engineering and making the complex simple to understand. Now more than ever, there is no reason not to get started learning how to work with electronic equipment and teaching yourself how to design and build electronics. This course is designed for complete beginners and is designed to take you to confidence working around all types of electricity (and to recognize electrical danger so you don't work on things you shouldn't!) In this class, you will come away with your own circuit on a breadboard that you have built using the most common electircal components (Wire, switches, resistors, transistors, capacitors, Diodes and an Integrated Circuit). Along the way you'll master these concepts: -What is Electrical Power and How to measure it? -How to deeply and intuively understand concepts like Volts, Amps, Resistance, Ohm's Law -How does wall outlet electricity differ from that in a battery? -How do you work with and on electrical devices safely and without damaging components or yourself? -How do you interpret a circuit diagram? -How to safely and correctly Use the basic Electronics Workbench Tools at the Makerspace -How to use a Breadboard to Build a Working Prototype of a Circuit This course is a pre-requisite to higher level electronics courses at the Makerspace and is intended for beginners of al ages. If you already have electronics skills you can test out of this directly into higher level courses. This is for total beginners. *NOTE: This is not a course on how to solder. Soldering is a seperate course and all the circuits we will build in this class involve no soldering. AGE RESTRICTIONS: Intended for 18 and up (exceptions can be made for ages 15-17 that are interested, and 12-14 are ok if they attend with a parent). Contact organizer for approval for students younger than 12. PRICING: $75 General Admissions To purchase a ticket please check the relevant eventbrite link here: https://www.eventbrite.com/e/electricity-electronics-for-complete-beginners-tickets-63719485697 MEMBERS: be sure to use your monthly discount code to redeem your 30% discount! DISCLAIMER: To ensure that spaces aren't taken up by people who wont be able to make their classes, there are NO REFUNDS offered for any of our official classes (this may or may not include classes organized by 3rd parties which are hosted in our space). If you are not able to make it to a class please contact us and we will credit you for a space in another class. MEMBERS MUST CHECK THEIR EMAIL FOR THE MONTHY DISCOUNT CODE. If a member buys a class ticket without entering the correct discount code we are not able to retroactively apply the discount. Codes are sent out every month and member discounts are not applied without manually inputting the code. If you are at all unsure about the discount code or discount process please contact us before buying a ticket.

Ticket Type Price Cart

 

Beginning electronics for children ages 7-11 years

 

 

Class Overview

This class is an introduction to circuitry and electronics using conductive thread, felt and fabric. Students will design, hand stitch and create artistic pieces and wearable art from fabric and felt that integrate conductive thread, LEDs and switches.

Class Cost

    • $50 for non-members including materials costs. You will be getting your very own Arduino micro-controller, laser cut parts, servo motor and power supply to construct your project which you will bring home with you at the end of class.

    • $40 for monthly members including materials costs to build your very own take home project (parts listed above)(you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership.

    Prequisites

    None

    Materials Used

    conductive thread, felt, and fabric

    Age Requirement

    7-11 years old, a guardian must be available to sign-in for each student.

Ticket Type Price Cart

 

Beginning electronics for children ages 7-11 years

 

 

Class Overview

This class is an introduction to circuitry and electronics using conductive thread, felt and fabric. Students will design, hand stitch and create artistic pieces and wearable art from fabric and felt that integrate conductive thread, LEDs and switches.

Class Cost

    • $50 for non-members including materials costs. You will be getting your very own Arduino micro-controller, laser cut parts, servo motor and power supply to construct your project which you will bring home with you at the end of class.

    • $40 for monthly members including materials costs to build your very own take home project (parts listed above)(you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership.

    Prequisites

    None

    Materials Used

    conductive thread, felt, and fabric

    Age Requirement

    7-11 years old, a guardian must be available to sign-in for each student.

Ticket Type Price Cart

 

Beginning electronics for children ages 7-11 years

 

 

Class Overview

This class is an introduction to circuitry and electronics using conductive thread, felt and fabric. Students will design, hand stitch and create artistic pieces and wearable art from fabric and felt that integrate conductive thread, LEDs and switches.

Class Cost

    • $50 for non-members including materials costs. You will be getting your very own Arduino micro-controller, laser cut parts, servo motor and power supply to construct your project which you will bring home with you at the end of class.

    • $40 for monthly members including materials costs to build your very own take home project (parts listed above)(you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership.

    Prequisites

    None

    Materials Used

    conductive thread, felt, and fabric

    Age Requirement

    7-11 years old, a guardian must be available to sign-in for each student.

Ticket Type Price Cart

 

Beginning electronics for children ages 7-11 years

 

 

Class Overview

This class is an introduction to circuitry and electronics using conductive thread, felt and fabric. Students will design, hand stitch and create artistic pieces and wearable art from fabric and felt that integrate conductive thread, LEDs and switches.

Class Cost

    • $50 for non-members including materials costs. You will be getting your very own Arduino micro-controller, laser cut parts, servo motor and power supply to construct your project which you will bring home with you at the end of class.

    • $40 for monthly members including materials costs to build your very own take home project (parts listed above)(you do not need to be a member to attend our classes, however, members do get discounts!) Learn about membership.

    Prequisites

    None

    Materials Used

    conductive thread, felt, and fabric

    Age Requirement

    7-11 years old, a guardian must be available to sign-in for each student.